The Web's Where You Study In!

Sub Code: 14064

1. Switches, Indicators and connectors of PC: Identification of front panel indicators and switches in a computer system of table top/ tower case model and also identification of rear side connectors.
2. PC system layout: Draw a Computer system layout and Mark the positions of SMPS, Mother Board, FDD, HDD, and CD-Drive/DVD-Drive add on cards in table top / tower model systems.
3. Mother Board Layout: Draw the layout of Pentium IV or Pentium Dual core or Pentium Core2 DUO mother board and mark Processor, Chip set ICs. RAM, Cache, Xtal, cooling fan, I/O slots and I/O ports and various jumper settings.
4. CMOS Setup Program: 1. Changing the Standard settings 2. Changing advanced settings (BIOS and Chipset features)
5. Installation of FDD: 1. Install and configure an FDD in a computer system. 2. Floppy drive diagnostics/servicing.
6. USB pen drives and I-pods.
   1. Connect and enable a pen drive or I-pod in a PC.
   2. Format the pen drive or I-pod.
   3. Copy files and folders from pen drive I-pod to HDD.
   4. Copy files and folders from HDD to pen drive or I-pod.
7. HDD Installation:
   1. Install the given HDD.
   2. Configure in CMOS-Setup program.
   3. Partition the HDD using fdisk.
   4. Format the Partitions.
8. Printer Installation & Troubleshooting:
   1. Installing and checking a Dot-Matrix Printer.
   2. Installing and checking an Ink jet / Laser Printer.
   3.Possible problems and troubleshooting.
9. Modem Installation:
   1. Install and configure a Modem in a windows PC.
   2. Check the working condition of modem with PC.
10. DVD Multi-recorder drive installation:
    1. Install a DVD Multi-recorder drive in a PC.
    2 Configure using device driver.
    3. Check the read / write operation using a cd / dvd.
11. Installation of Scanner:
    1. Connect the given scanner with a PC.
    2. Configure the scanner with driver.
    3. Check the scanner by scanning a page / a portion in a page.
12. Familiarize : Scandisk, recent Anti-virus software and recent PC Diagnostic software.
13. Assembling a PC: Assemble a Pentium IV or Pentium Dual Core Pentium Core2 Duo system with necessary peripherals and check the working condition of the PC.
14. Install and Configure Windows NT2003 operating system in a PC.
15. Construct Network by connecting one or two computer with a Windows NT2003 Server.
16. Install and Configure LINUX operating system in a PC.
17. Construct Network by connecting one or two computer with a LINUX Server.
18. Configure the network for an Internet server.
19. Add / Remove devices using Hardware Wizard.
20. Add and Manage User Profile, Set permission to the users both in Windows NT 2003/ LINUX.

EQUIPMENT REQUIRED